Standard oxygen generators use the pressure swing adsorption (PSA) principle to produce oxygen with up to 95% purity. To achieve higher purity, a second stage of oxygen purification is essential. Our oxygen purifier consists of two adsorption vessels filled with special adsorbents, which further remove non-oxygen gases (such as 4% ammonia, 1% nitrogen, etc.) from the oxygen stream, achieving up to 99.5% purity.




Technical Specification
▔▔▔
| Purified Oxygen Purity | 99~99.5% |
| Purified Oxygen Flow Rate | 1~60Nm³/hr |
| Purified Oxygen Dew Point | -60~-40℃ |
| Purified Oxygen Pressure | 1~5Bar |
| Standard Oxygen Pressure | 5Bar |
| Inlet Temperature | 20~35℃ |
| Voltage/Frequency | 380V/220V/50~60Hz |
Note: Specific requirements can be made upon request
Product Specification
▔▔▔
| KOC-SA+ | Purity: 99~99.5% |
Model | Standard O₂to Purified Oxygen Ratio (Nm³/hr) | |
O₂ Consumption Rate | Purified O₂ Output | |
KOC-10 | 14 | 10 |
KOC-20 | 28 | 20 |
KOC-30 | 42 | 30 |
KOC-40 | 56 | 40 |
KOC-50 | 75 | 50 |
KOC-60 | 90 | 60 |
Note:Customized Unit Acceptable
Technical specifications subject to change without notice